
ANSI DN50 Carbon Steel Elbow
The ANSI DN50 Carbon Steel Elbow is a 2-inch butt-weld fitting made to ASME B16.9. It changes pipe direction by 90° and is used in fire sprinkler lines, HVAC loops, chemical feed systems, and oil/gas gathering headers. We manufacture this size daily at our Mengcun facility. If you're sourcing carbon steel butt-weld fittings from China, you've likely seen quotes ranging widely in price and quality. Here's what we do differently—and why our repeat customers stick with us.
Product Summary
The ANSI DN50 Carbon Steel Elbow is a 2-inch butt-weld fitting made to ASME B16.9. It changes pipe direction by 90° and is used in fire sprinkler lines, HVAC loops, chemical feed systems, and oil/gas gathering headers.
We manufacture this size daily at our Mengcun facility. If you're sourcing carbon steel butt-weld fittings from China, you've likely seen quotes ranging widely in price and quality. Here's what we do differently-and why our repeat customers stick with us.


Specifications at a Glance
|
Parameter |
Specification |
What It Means for You |
|
Standard |
ASME B16.9 / ANSI |
Your elbow meets U.S. industry standards, so it fits with other ANSI-compliant components. No compatibility issues. |
|
Nominal Size |
DN50 (2 inch) |
This matches 2-inch IPS (iron pipe size) carbon steel pipe. DN50 is the metric equivalent used in international trade. |
|
Material |
Carbon Steel (ASTM A234 WPB) |
WPB grade is standard for moderate temperatures and pressures. Handles most industrial applications reliably. |
|
Type |
Butt Weld, Seamless |
No seam means no weak point along the body. Butt weld creates a permanent joint-no gaskets to leak or threads to strip. |
|
Angle |
90° standard (45° and 180° available) |
90° is the most common turn in pipeline design. Other angles available if your layout requires a different bend. |
|
Radius |
Long Radius R=1.5D (standard) / Short Radius R=1.0D |
Long radius gives smoother flow and less pressure drop-use this unless space is too tight. Short radius fits cramped layouts but costs you some pumping efficiency. |
|
Wall Thickness |
SCH40, SCH80, STD, XS, or as specified |
Must match your pipe's wall thickness. Mismatched walls create a weak weld joint. Tell us your schedule and we'll match it. |
|
Surface |
Black anti-rust coating or galvanized |
Black coating protects during shipping and storage. Galvanized adds corrosion resistance for outdoor or wet environments. |
Where We Make It
Mengcun – China's Pipe Fitting Manufacturing Hub
Our shop is in Mengcun County, Hebei. If you know Chinese pipe fittings, you know Mengcun - it's the main production hub for elbows and fittings in the country. Being here means we get raw steel fast, we have machine shops nearby for tooling repairs, and we can ship out the same day we finish production.
Ports: 120 km south of Xingang (Tianjin), 260 km southeast of Beijing Capital Airport. For sea freight, we truck to Xingang in about 2 hours. For air samples, Beijing is a 3-hour drive. This isn't marketing talk - it's how we get your order on the vessel before other suppliers even finish packing.
Plant size: 18,000 square meters under roof. Equipment list: 3500T hydraulic press, 2500D CNC ring rolling mill, 7 forging hammers, 7 large bandsaws, plus lathes and drillers. We push out about 13,000 tons of flanges and fittings per year. The ANSI DN50 Carbon Steel Elbow rolls off our line every single day - not a specialty item, not a "we'll figure it out" product. We make it in volume, which keeps the price down and the quality consistent.

What You Get With This Elbow
Flow characteristics: Long radius means less turbulence. The fluid or gas doesn't slam into a sharp corner - it follows a smooth curve. This matters when you're pumping over distance, because every bit of pressure you lose at a fitting costs you energy. Short radius we keep for tight spots where you simply don't have the room. Most customers take long radius. We keep both in stock.
Welding: Butt weld. No threads to strip, no gaskets to replace. Weld it on, grind it smooth, and it becomes part of the pipe. Done right, it offers service life comparable to the pipe itself. We bevel the ends to standard angles so your welder doesn't have to grind extra.
Wall consistency: The hot pushing process we use spreads the metal evenly through the bend. The outside of the curve doesn't thin out. This is where cheap elbows fail - thin outer walls blow out under pressure. We check wall thickness on every batch.
Carbon steel grade: We run ASTM A234 WPB as standard. For higher temps or sour service, we can switch to WPC or stainless 304/316. Just tell us your conditions.
Want to see what else we manufacture? Browse our full range of pipe fittings here.
Where This Size Gets Used
DN50 is a 2-inch line. Not huge, not tiny. Common in:
Fire sprinkler branch lines inside buildings
HVAC chilled water and hot water loops
Oil/gas gathering headers in the field
Water treatment chemical injection points
Steam tracing lines around process equipment
Chemical feed lines where you need corrosion resistance (spec stainless for that)
If your pipe is 2-inch schedule 40 or 80, this elbow fits. If you're running a different schedule, we can match it. Just give us your spec.
What We've Done For Others
We ship to Russia, Korea, France, Dubai, Southeast Asia, Spain, Israel, Thailand, South America. Mostly repeat customers. One Korean trading house has been ordering from us for 8 years - they send us their monthly forecast, we produce and ship on their schedule. No drama.
A French valve manufacturer uses our elbows as weld-on ends for their valve assemblies. They need consistent bore size so their valves seat properly. We hold tolerances tight enough that they reduced their incoming inspection frequency based on our consistent batch quality - they trust the batch records we send with each shipment.
We're not the cheapest on Alibaba. We're also not the most expensive. We're the supplier that answers emails within a few hours (Sandy's on it), ships on the date promised, and replaces anything that doesn't pass inspection (rare, but it happens).
Our Certificate




We hold ISO9001 for quality management, CE for European pressure equipment, and 3A credit rating. These don't make the elbow better - they just mean we have documented processes and we follow them.
Frequently Asked Questions
Quick Answers to Common Customer Questions
What does ANSI DN50 actually mean?
+
-
ANSI means the dimensions follow American National Standard. DN50 is metric labeling for 2-inch nominal pipe size. So an ANSI DN50 elbow fits 2-inch IPS (iron pipe size) carbon steel pipe. It's interchangeable with any ASME B16.9 fitting of the same size.
How do I know which wall schedule to order?
+
-
You need to match the elbow's wall thickness to your pipe's wall thickness. If your pipe is SCH40, order SCH40. If it's SCH80, order SCH80. If you're not sure, measure your pipe's OD and wall thickness and tell us - we'll confirm what you need.
Long radius vs short radius - which one do I need?
+
-
Long radius (1.5D) is your default choice. It gives smoother flow and lower pressure drop. Short radius (1.0D) only when you have a tight space and the bend needs to be compact. Short radius elbows create more turbulence - acceptable for low-flow or non-critical lines. If in doubt, pick long radius.
Can I get this in stainless instead of carbon steel?
+
-
Yes. We make the same elbow in 304 and 316 stainless. Also available in alloy steels if you're working high temperatures (above 500°F / 260°C). Carbon steel is standard because it's cost-effective for general service. Just let us know your fluid type and operating temperature and we'll recommend the right material.
What's your lead time for a container load?
+
-
For standard ANSI DN50 Carbon Steel Elbow in SCH40, long radius: 15-20 days after order confirmation. If you need faster, we keep about 500+ pieces of this size in stock at any time - can ship partial within 3 days. For custom angles or materials, add 10-15 days for tooling and production. Ask Sandy for current stock levels when you inquire.
Order Direct
We sell direct. No middleman. You talk to the factory.
Contact Sandy:
Mobile / WhatsApp / WeChat: 0086-15127785550
Skype: sandy198607
QQ: 767076081
Email: sandy@yongxingflange.com
Address: Dingzhuangzi Industrial Zone, Mengcun, Hebei, China
Send Sandy your pipe schedule, quantity, and destination port. She'll send back a price with shipping options. Samples available - pay the freight, we'll cover the parts.
Hot Tags: ansi dn50 carbon steel elbow, China ansi dn50 carbon steel elbow manufacturers, suppliers, factory, Carbon Steel Pipe Fittings
Send Inquiry








