Weld Neck Flange
Weld Neck Flange
video
Weld Neck Flange
Weld Neck Flange
Weld Neck Flange
Weld Neck Flange
1/2
<< /span>
>

Weld Neck Flange

DIN PN16 steel Flange designs: Weld neck flange (WN flange), slip-on flange(SO flange), lap joint flange(LJ flange), socket weld flange(SW flange), threaded flange(TH flange), blind flange(BL flange).

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange. There are two welding neck flanges designs – the first type is used with wipes while the second, longer type cannot be used with pipes but with a process plant. The weld neck flange comprises of a round fitting that extends beyond the rim of the circumference. These flanges, typically manufactured from forging, are actually welded to pipes.


Sealing face
1.The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face. This face type allows the use of a wide combination of gasket designs, including flat ring sheet types and metallic composites such as spiral wound and double jacketed types. The purpose of a RF flange is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint.  2.The Flat Face flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting. Flat face flanges are never to be bolted to a raised face flange. 3.The Ring Type Joint flanges are typically used in high pressure (Class 600 and higher rating) and/or high temperature services above 800°F (427°C). They have grooves cut into their faces which steel ring gaskets. The flanges seal when tightened bolts compress the gasket between the flanges into the grooves, deforming (or Coining) the gasket to make intimate contact inside the grooves, creating a metal to metal seal.An RTJ flange may have a raised face with a ring groove machined into it.
4.This raised face does not serve as any part of the sealing means. For RTJ flanges that seal with ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the compressed gasket will not bear additional load beyond the bolt tension, vibration and movement cannot further crush the gasket and lessen the connecting tension.



amanda._



Hot Tags: weld neck flange, China weld neck flange manufacturers, suppliers, factory, Steel Pipe Bends And Elbows, Socket Weld Raised Face Flange, Ansi Standard Metal Pipe Flange

Send Inquiry

(0/10)

clearall