Class 125 Ansi Standard Flange
Class 125 Ansi Standard Flange
video
Class 125 Ansi Standard Flange
Class 125 Ansi Standard Flange
Class 125 Ansi Standard Flange
1/2
<< /span>
>

Class 125 Ansi Standard Flange

Product Name:Class 125 Ansi Standard Flange In its denotation, the word Class is followed a by dimensionless number. This includes Class 150, 300, 400, 600, 900, 1500, and 2500.

Built for Real-World Piping Jobs
 

"You know that feeling when a pipe fitting just works? No leaks, no headaches, no second-guessing. That's what we aim for with every Class 125 Ansi Standard Flange that leaves our shop. If you're into building pipeline hardware or buying bulk building materials for commercial projects, this little guy deserves a closer look."

 

What Makes This Flange Different?

Let's be honest – a flange is a flange, right? Not exactly. The Class 125 Ansi Standard Flange hits that sweet spot between strength and affordability. It's not over-engineered for crazy high-pressure jobs (that's what Class 300 is for), but it's way tougher than those no-name plates you see floating around online.

What we love about it:

Machines nicely – No annoying hard spots that eat up your drill bits

Flat face design – Works perfect with cast iron or ductile iron systems

Bolt holes line up – Because nobody wants to wrestle a misaligned flange at 4 PM on a Friday

Corrosion-resistant options – Got a damp basement or outdoor run? Go stainless.

product-675-506

We make these in carbon steel and various stainless steel grades. Need something specific like ASTM A105 or A182? Just tell us. We've done it before. 

 

Quick Specs – No Fluff, Just Facts

 

 

Here's the technical stuff from our shop floor. All data follows ANSI/ASME B16.1 standards.

 

Parameter

Details

Standard

ANSI B16.1 Class 125

Pressure Rating (steam)

150 psi at 450°F

Pressure Rating (water/oil)

200 psi at 150°F

Flange Type

Flat face, threaded or slip-on

Size Range

½" to 24" (larger on request)

Common Materials

Grey cast iron, ductile iron, carbon steel, stainless steel (304/316)

Facing

Flat face (FF) as standard

Drilling Template

ANSI class 125 standard pattern

Origin

Made in Mengcun County, China – the pipe fittings hub

 

Need a custom drill pattern or non-standard size?

We've done weird requests before. Just send a drawing.

Where Do People Actually Use This?

Honestly, everywhere you don't want to worry about leaks.

Building pipeline hardware

Water supply, HVAC, drain lines

01

Industrial chiller plants 

Good for moderate pressure and temp swings

02

Fire protection systems

Paired with butterfly valves or gate valves

03

Major Construction Materials Projects

High-Rise Residential Buildings, Commercial Parking Facilities

04

Pump connections

Low-pressure side of water pumps

05

We've sent these to contractors in Russia, Thailand, Spain, Israel, and all over the Middle East. If it works in Dubai's heat and Russia's cold, it'll work for you. 

A Few Real Questions We Get Asked

Q: Q: Is Class 125 the same as PN20?

A: A: Roughly, yes. But don't just swap them without checking bolt patterns. We always suggest matching the standard to your system.

Q: Q: How do I know if I need Class 125 or Class 150?

A: A: Class 125 is for cast or ductile iron systems (lower pressure). Class 150 is for steel systems. Different thickness, different bolt circle.

Q: Q: Can you ship to my port in 2-3 weeks?

A: A: Most likely. We're 120 km from Xingang Port. Sea freight to Southeast Asia or Europe runs pretty smooth from here.

Q: Q: Do you do small test orders?

A: A: Yeah – 10 pieces, 50 pieces, doesn't matter. We don't turn down small startups.

Q: Q: What's your payment like?

A: A: T/T, L/C, and for old partners, sometimes we work something out. Just ask.

 

Who's Behind These Flanges Anyway?

 
product-420-315

We're CANGZHOU HANGXIN FLANGE CO.,LIMITED. Been at it since 1993. That's over 30 years of melting, forging, turning, and shipping flanges out of Mengcun County – yeah, the "hometown of elbows and pipe fittings" in China.

We've got 18,000+ square meters of shop space, a 3500T hydraulic press, a 2500D CNC ring rolling machine, and a team that actually cares if the bolt holes line up. Annual output? Around 13,000 tons of forged flanges and fittings.

Not a giant factory. But that's kind of the point. We're small enough to double-check your order, but big enough to handle a 40" container.

Let's Be Real – Why Buy From Us?

 

 

Three reasons:

We answer messages. Email, WhatsApp, carrier pigeon – whatever. You won't get ghosted.

We've made every mistake once. So you don't have to.

You get a real person who knows the difference between a slip-on and a weld neck.

If you're still comparing quotes, fine. But if you want a Class 125 Ansi Standard Flange that actually fits, ships on time, and doesn't come with drama – give us a shot. We've earned the trust of buyers in South America, Korea, France, and beyond.

 

Ready to Try One?

 

 

Send us your list – size, material, quantity, and any weird special requests. We'll send back a real quote (not an automated robot thing) within 24 hours.

Or just ask a question. No pressure. We're here to help you get the job done right.

1)

Hot Tags: class 125 ansi standard flange, China class 125 ansi standard flange manufacturers, suppliers, factory, Ansi Standard Metal Pipe Flange, Socket Weld Raised Face Flange, Steel Pipe Bends And Elbows

Send Inquiry

(0/10)

clearall