
EN1092 CARBON STEEL FLANGE
Looking for a forged carbon steel flange that fits European-standard piping systems without the usual sourcing headaches? Our EN1092-1 model covers PN2.5 through PN100, sizes DN15 to DN1200+, and comes in weld-neck, slip-on, blind, and plate types. We machine them in-house, control the material traceability, and ship from our Hebei factory via Xingang Port. No fluff, just flanges that seal right and hold pressure.
Let's Cut to the Chase
You're looking at flanges because you've got a piping job to finish. Maybe it's a new building's water main, an industrial steam line, or a pump station retrofit. You need parts that arrive on time, fit right the first time, and don't give you grief down the road. That's the only reason we make our EN1092 carbon steel flange the way we do.
We've been at this since 1993. We're not here to wow you with marketing fluff. We're here to supply flanges that do what they're supposed to do-connect pipes reliably, hold pressure, and seal tight. Period.

What You're Getting Here
This is a forged carbon steel flange made to the European EN1092-1 standard. It's a direct fit for metric piping systems. You'll see it used everywhere from commercial building plumbing to industrial processing lines.
EN1092-1 covers flanges from DN 10 up to DN 4000, with pressure ratings ranging from PN 2.5 all the way to PN 400. The standard uses the PN (Pression Nominale) rating system-unlike ASME's Class system, PN numbers represent approximate pressure in bars at ambient temperature. For reference, a PN16 flange handles about 16 bar (232 psi) at room temperature, roughly equivalent to Class 150 in the ASME system.
The material is carbon steel-grades like ASTM A105, Q235B, P250GH, or 20# depending on your pressure and temperature needs. It's strong, weldable, and cost-effective. We forge these flanges, not cast them. That means the steel grain structure is tighter and more aligned. Practically speaking, it handles pressure cycling and vibration better than a cast flange. If you've ever had a cast fitting crack under thermal stress, you know exactly why this matters.
Which Type Do You Actually Need?
We produce the common EN1092 types. Here's the breakdown in plain English:
Type 01 (Plate Flange): Simple flat ring. Weld it to the pipe. Low pressure, low cost. Good for drainage or HVAC water.
Type 05 (Blind Flange): Solid disc. Used to cap off a pipe end or equipment opening. Good for future tie-ins or pressure testing.
Type 11 (Weld-Neck Flange): The heavy-duty one. Has a long tapered neck that reinforces the weld joint. Use this for high pressure, high temperature, or anywhere you can't afford a failure.
Type 12 (Slip-On Flange): Slides over the pipe end. Easier to align than a weld-neck. A solid choice for moderate pressure and general service.
Type 13 (Threaded Flange): No welding required-screws onto the pipe. Useful in tight spaces or where welding isn't practical.
Not sure which one fits your job? Send us your system pressure, temperature, and pipe schedule. We'll tell you what works.
Quick Specs – No Fluff
Product identifiers for your records – Brand: Hangxin Flange | Model: EN1092-CS-Flange | Material: Carbon Steel (ASTM A105 / Q235B / P250GH) | Standard: EN1092-1 | Pressure Range: PN2.5 – PN100 | Sizes: DN15 – DN1200+
|
Parameter |
Details |
|
Standard |
EN1092-1 |
|
Material Options |
Carbon steel (ASTM A105, Q235B, 20#, P250GH, 16Mn, etc.) |
|
Pressure Ratings |
PN2.5, PN6, PN10, PN16, PN25, PN40, PN64, PN100 (higher available on request) |
|
Size Range |
DN15 to DN1200+ (larger sizes possible on request) |
|
Flange Types |
Type 01 (Plate), Type 05 (Blind), Type 11 (Weld-neck), Type 12 (Slip-on), Type 13 (Threaded) |
|
Sealing Faces |
Form A (Flat Face), Form B1 (Raised Face – 2mm height), Form D/E (Tongue & Groove) |
|
Raised Face Height |
2 mm (standard) |
|
Surface |
Anti-rust oil (standard), black paint, or galvanized (optional) |
|
Production Route |
Forged (per EN 10222) or Plate (per EN 10025) |
|
Testing |
Dimensional, hydrostatic, NDT – available as needed |
|
Certificates |
EN10204 3.1, ISO9001, CE, 3A |
Technical Reference – EN1092-1 Type 11 Weld-Neck Flange Dimensions (PN10)
For engineers and procurement folks who need actual numbers, here are the key dimensions for our most popular weld-neck flange series. All measurements in millimeters.
|
DN |
Flange OD (D) |
Bolt Circle (K) |
Bolt Holes (L) |
Bolts (qty) |
Neck OD (A) |
Flange Thickness (C2) |
|
15 |
95 |
65 |
14 |
4 |
21.3 |
16 |
|
20 |
105 |
75 |
14 |
4 |
26.9 |
18 |
|
25 |
115 |
85 |
14 |
4 |
33.7 |
18 |
|
32 |
140 |
100 |
18 |
4 |
42.4 |
18 |
|
40 |
150 |
110 |
18 |
4 |
48.3 |
18 |
|
50 |
165 |
125 |
18 |
4 |
60.3 |
18 |
|
65 |
185 |
145 |
18 |
8 |
76.1 |
18 |
|
80 |
200 |
160 |
18 |
8 |
88.9 |
20 |
|
100 |
220 |
180 |
18 |
8 |
114.3 |
20 |
|
125 |
250 |
210 |
18 |
8 |
139.7 |
22 |
|
150 |
285 |
240 |
22 |
8 |
168.3 |
22 |
|
200 |
340 |
295 |
22 |
8 |
219.1 |
24 |
|
250 |
395 |
350 |
22 |
12 |
273.0 |
26 |
|
300 |
445 |
400 |
22 |
12 |
323.9 |
26 |
|
350 |
505 |
460 |
22 |
16 |
355.6 |
26 |
|
400 |
565 |
515 |
26 |
16 |
406.4 |
26 |
Note: Dimensions are for reference. PN16, PN25, and PN40 series have different dimensions. Contact us for specific pressure ratings and sizes.


Honestly, we sell these into all sorts of places. Here's where they end up most often:
Commercial building jobs – water supply, fire sprinkler mains, HVAC chilled water, and condenser water lines.
Industrial plants – process water, compressed air, low-pressure steam, and cooling tower piping.
Water treatment facilities – connecting pumps, valves, and filter vessels.
Power plants – auxiliary cooling circuits and service water systems.
If your system is designed to metric pipe sizes and EN pressure ratings, this flange is your match. If you're working to ANSI/ASME standards, we have those too. But don't mix them-they're not interchangeable. EN1092 and ASME B16.5 use different bolt circle diameters, flange thicknesses, and pressure-temperature ratings.
How We Make These – Step by Step
We control the entire production process in our own shop. Here's the route:
Material check
We verify the steel chemistry before anything else. No surprises.
Cut and heat
Billets are cut to size and brought up to forging temperature.
Forge
Using our 3500T press and 2500D ring roller, we shape the rough flange. This is where the strength comes from.
Machine
We turn the OD, bore the ID, face the sealing surface, and drill the bolt holes. Our lathes and drills handle diameters up to 2800mm.
Coat and mark
Standard anti-rust oil goes on. We stamp each flange with material grade, size, pressure rating, and heat number for full traceability.
Pack
Efficient and precise processing and testing equipment.
We push out about 13,000 tons of flanges and fittings a year. That's enough volume to keep production running efficiently, but we're still small enough to keep an eye on every batch.
Who's Behind This Operation
We're Cangzhou Hangxin Flange Co., Limited. Started in 1993. Located in Mengcun County, Hebei-right in the middle of China's pipe fitting manufacturing area. It's not a glamorous location, but it's practical. Skilled labor is available. Suppliers are nearby. And we're 120 km from Xingang Port in Tianjin, which makes export shipping straightforward.
Our facility covers over 18,000 square meters. Fixed assets run about 50 million CNY. We're not the biggest flange manufacturer out there, and we don't try to be. What we are is responsive and consistent. Customers in Russia, South Korea, France, the UAE, Spain, Thailand, and across South America have been ordering from us for years-many of them since the early 2000s.
Custom Work – We Do It Regularly
Stock items cover most jobs. But sometimes you need something outside the standard table. We handle that.
- Non-standard diameters or thicknesses
- Different material grades (including stainless steel)
- Specific sealing surface profiles
- Custom stamping (your logo, project numbers, etc.)
Send a drawing or a sketch. Our engineers will review it and tell you if we can do it-and for most things, we can. We'll give you a realistic timeline and pricing, not a blanket promise.
Certifications – What We Actually Have
We hold ISO9001 for quality systems, CE marking for European market access, and 3A for sanitary applications. We can issue EN10204 3.1 material certificates with each shipment. If your project requires third-party inspection-like TÜV, DNV, or Bureau Veritas-we've done that before and can arrange it.

How We Work with Customers – A Real Example
On-Time Delivery, On-Spec Product – A Case Study
A customer in Southeast Asia needed a large order of PN16 weld-neck flanges for a water treatment plant. They had a specific coating requirement-not just oil, but a full black paint job-and they needed delivery within six weeks.
We adjusted our production schedule, ran the coating in-house to maintain control, and shipped through Xingang Port on time. The flanges arrived on site, passed inspection, and the installation went ahead without delays. That was two years ago. They've since placed repeat orders for two more plant expansions.
That's the kind of relationship we aim for. Not a one-time sale, but a supplier they can count on when the next project comes up. If you want to see more of our work, check out our production facility and quality control process here.
Questions We Get from Real Buyers
These are the practical questions we hear on calls and emails-not the polished ones from a marketing script.
We're spec'd for ANSI/ASME flanges. Can we use this EN1092 flange instead?
+
-
No. EN1092 and ASME flanges have different dimensions-bolt circle diameters, thicknesses, and pressure ratings don't line up. EN1092 uses DN (metric pipe sizes) while ASME B16.5 uses NPS (inches), and the bolt hole patterns are different. They're not bolt-on replacements. Stick with the standard your system was designed to.
What does PN mean and how do I choose the right one?
+
-
PN (Pression Nominale) is the European pressure rating system. The PN number approximates the maximum working pressure in bars at ambient temperature. For example, PN16 = about 16 bar (232 psi) at room temperature. Choose the PN rating that meets or exceeds your system's maximum operating pressure. If you're not sure, send us your specs and we'll recommend one.
What's the practical difference between a flat face and raised face flange?
+
-
The raised face (Form B) has a small 2mm ridge that concentrates gasket compression. It gives you a tighter seal at higher pressures. The flat face (Form A) is simpler and usually used with full-face gaskets in low-pressure systems. If you're not sure, check what gasket type your system uses. That usually tells you which face you need.
How do you ship these, and what's the typical lead time?
+
-
Most export orders go out of Xingang Port in Tianjin, which is about 120 km from our factory. For standard sizes we have in stock, we can ship within 7-10 days after order confirmation. For custom orders or large quantities, plan on about 20-30 days. We'll give you a firm date when we quote.
Do you keep stock of common sizes, or do you make everything to order?
+
-
We keep inventory of the most common sizes-DN40 through DN600 in PN10 and PN16 ratings, weld-neck and slip-on types. We can ship those quickly. For anything outside that range, we start with raw material and make it to order.
How does your anti-rust oil hold up during ocean shipping?
+
-
The oil coating is a temporary measure-it protects against moisture during transit and short-term storage. For long-term storage or outdoor exposure, we recommend upgrading to a galvanized coating. We can arrange that as an option.
What happens if we receive a batch and find a dimensional issue?
+
-
We do dimensional checks on every batch before shipping. But if something slips through, contact us immediately with photos and measurements. We'll assess the issue and, if it's our fault, work out a replacement or credit. We've been at this long enough to know that trust is built on how you handle problems, not just on smooth sales.
Let's Get Your Project Moving
You've got a piping job to complete. You need a reliable source for EN1092 carbon steel flanges that fit, seal, and hold up. We've got the product, the experience, and the straightforward approach to get them to you without wasted time or unnecessary back-and-forth.
Reach out with your specification sheet or a rough idea of what you need. We'll respond with a clear quote and realistic delivery timeline. No games, just work.
Hot Tags: en1092 carbon steel flange, China en1092 carbon steel flange manufacturers, suppliers, factory, low pressure steel flange, Din Standard Flanges, custom steel flange, sealing steel flange, asme steel flange, ring joint flange
Send Inquiry








