DN80Stainless Steel Flange
DN80Stainless Steel Flange
video
DN80Stainless Steel Flange
DN80Stainless Steel Flange
DN80Stainless Steel Flange
DN80Stainless Steel Flange
DN80Stainless Steel Flange
1/2
<< /span>
>

DN80Stainless Steel Flange

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different. Lily lily@yongxingflange.com   yanglily1126@gmail.com WhatsApp:+8618911077577 Skype:+8618911077577: WeChat:18911077577

Quick introduction of Slip on Raised face flange
Item Stainless steel flange,stainless steel pipe flange
Standard 

ANSI, ASME, DIN, BS, JIS, GB, ISO etc

Material

310S,310,309,309S,316,316L,316Ti,317,317L,321,321H,347,347H,304,304L,302,

301,201,202,405,410,420,430,904L etc

Type

Plate Flange, Flat Flange, Slip on Flange, Welding Neck Flange, Long Welding Neck Flange, 

Blind Flange, Socket Welding Flange, Thread Flange, Screwed Flange, Lap Joint Flange,etc

Connection type Raised Face, Flat Face, Ring Type Joint, Lap-Joint Face, Large Male-Female, Small Male-Female,Large tongue groove, Small tongue groove etc
Size 1'' and 1/2'' ~ 120'' (DN40-DN3000)
MOQ 1 piece
Price term EXW factory, FOB, C&F and CIF
Payment term T/T, L/C, West Union, Money Gram and etc
Export to USA,Canada,Australia,Singapore,Indonesia,Hongkong,Oman,Vietnam etc
Package Standard export wooden case or as you requested
Application It is usually used in constructions,petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric etc.

 

 
dn80stainless-steel-flange10046332463

The role of connection types

Convex (RF)

They are the most commonly used type in process plant applications and are easily identifiable. It is called a convex face because the gasket surface is higher than the bolt circle. This surface type allows for the use of a variety of gasket design combinations, including flat ring plate types and metal composite materials such as spiral wound and double jacketed types.

Flat (FF)

Their gasket surface is in the same plane as the bolt circle. Typically those applications where mating flanges or flange fittings are made from castings. Never bolt to a raised face flange. ASME B31.1 states that when connecting a flat cast iron flange to a carbon steel flange, the raised surface on the carbon steel flange must be removed and a full flat gasket is required. This is to prevent the thin, brittle cast iron flange from popping into the gap created by the raised surface of the carbon steel flange.

Ring Joint (RTJ)

Typically used in high pressure (Class 600 and above) and/or high temperature environments above 800°F (427°C). They have grooves carved into their surface and come with steel ring washers. The flanges seal when the tightened bolts compress the gasket between the flanges into the groove, deforming (or imprinting) the gasket into tight contact within the groove, creating a metal-to-metal seal.

They may have a convex surface with annular grooves machined into it. This raised surface does not serve as any part of the sealing device. For RTJ flanges sealed with ring gaskets, the raised surfaces of the connected and tightened flanges may come into contact with each other. In this case, the compressed gasket will not bear additional load beyond the bolt tension, and vibration and movement cannot further crush the gasket and reduce the connection tension.

Tongue and Groove (T&G)

The tongue and groove faces of this flange must match. One flange face has a raised ring (tongue) machined into the flange face, while the mating flange has a matching depression (groove) machined into its surface.

Tongue and groove facings are standardized in large and small sizes. They differ from male and female fittings in that the inside diameter of the tongue and groove does not extend into the flange base, leaving the gasket on its inside and outside diameters. These are commonly found on pump covers and valve covers.

Male and Female (M&F)

For this type, the flanges must also match. A flange face has an area that extends beyond the normal flange face (external thread). The other flange or mating flange has matching depressions (bores) machined into its surface.

The female side is 3/16" deep and the male side is 1/4" tall, both smooth finished. The outside diameter of the internal thread surface is used to locate and secure the washer. In principle, 2 versions are available; small M&F flange and large M&F flange. Customized male and female faces are commonly found on heat exchanger housings for channels and cover flanges.

dn80stainless-steel-flange10047113623

 

 

 

Hot Tags: dn80stainless steel flange, China dn80stainless steel flange manufacturers, suppliers, factory, non standard steel flange, jis steel flange, durable steel flange, custom steel flange, wholesale steel flange, sealing steel flange

Send Inquiry

(0/10)

clearall