
ANSI Steel Forged DN100 Flange
CANGZHOU HANGXING FLANGE CO.,LIMITED ,we produce steel flange and fittings.ANSI ,GOST,DIN,JIS ,BS and other standards as customer requirement. Email:sandy@yongxingflange.com Whatsapp/Wechat:0086 15127785550
Tried, Tested, and Made to Last
You don't need a fancy story to sell a flange. You just need one that fits, seals, and doesn't turn into a problem six months later. That's exactly why the ANSI Steel Forged DN100 Flange stays on our customers' reorder lists – sometimes for years.
We're CANGZHOU HANGXIN FLANGE CO., LIMITED. Started in 1993, based in Mengcun County – the well-known "hometown of elbows and pipe fittings" in China. We're not the biggest, but we've been doing this long enough to know what matters. And what matters is making flanges that don't embarrass you on site.
One of our lathe hands, Old Li (over 20 years in the shop), put it this way:
"Some flanges sound wrong when you cut them – chattering, like a toothache. But this DN100? Smooth cut. The chips curl off even. You don't keep stopping to fix the tool."
That sound difference comes from forging, not casting. Cast steel can have tiny voids. Hit one with a cutting tool and you're replacing an insert. Forged steel – which is what we use for the ANSI Steel Forged DN100 Flange – has a continuous grain structure.

It cuts clean and holds up under pressure and temperature changes. We don't substitute cast or plate flanges for forged ones. It would make the price lower. But it would also make the quality worse.
Specifications – no guesswork
|
Parameter |
Details |
|
Standards |
ANSI B16.5 (also DIN, JIS, BS, GOST, EN1092 – available) |
|
Size |
DN100 / 4 inch |
|
Pressure class |
150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB |
|
Materials |
Carbon steel A105, stainless steel 304 / 316 (other grades on request) |
|
Face type |
RF / FF / RTJ |
|
Max machining diameter |
Up to 2800 mm (DN100 is routine for us) |
|
Annual output |
13,000 tons (flanges + forged fittings) |
|
Factory area |
18,000+ m² |
|
Fixed assets |
~50 million RMB |
Where customers actually use this flange
We list this under Building Pipeline Hardware and Building Materials on our site. But real projects tell a better story:
Thailand
HVAC water lines in a shopping mall. The buyer's comment: "I don't have to sort your flanges. Every one works."
Russia
District heating at -30°C. The on-site team said the bolt holes lined up without reaming. When it's that cold, saving one step is a big deal.
Dubai
A first order of 20 pieces for testing. After receiving them, the buyer ordered 500 without asking for a discount. Reason: "I compared three suppliers. Yours were the least hassle."
That phrase – least hassle – is probably the best compliment we've ever received.
Production flow – from steel bar to job site
Cutting:Round steel bars cut to precise weight.
Heating: Furnace heating until red and evenly hot.
Forging: Shaped under our 3500T hydraulic press, 2500D CNC ring rolling machine, or one of seven forging hammers.
Machining: Lathes and drillers machine the face, bore, and bolt holes (maximum diameter 2800 mm).
Inspection: Every piece checked for hardness, dimensions, and markings. No spot checks – each one.
Coating & packing: Anti-rust oil, plastic caps on both ends, then wooden cases for shipping.
Xingang Port is only 120 km away, so logistics move quickly.
Markets we already serve
Russia, South Korea, France, Dubai, wider Middle East, Southeast Asia (Thailand, Vietnam, Indonesia, etc.), Spain, Israel, South America. Plus others that came through repeat orders. We don't have a big sales team – most of this came from one customer telling another.

No slogans. Here's what you actually get:
Small orders accepted – Need 10 pieces to finish a project? That's fine.
Non-standard requests – Send a drawing. Most of the time we can make it. If not, we'll say so.
Real certificates – ISO9001, 3A, CE. You're welcome to audit us.
After-sales that replies – If something is wrong (rare, but it can happen), email admin@yongxingflange.com. We'll replace or remake it. No arguments.
Frequently asked questions (from real customers)
Q: 1. What does "ANSI Steel Forged DN100 Flange" actually mean?
A: "ANSI" means the dimensions follow ASME B16.5. "DN100" is the metric size – approximately 4 inches. "Forged" means the steel was shaped by hammering or pressing while solid, not poured as liquid metal. This creates a continuous grain structure, which handles high pressure and temperature changes better than cast flanges.
Q: 2. How does a forged flange differ from a butt weld fitting?
A: A flange is bolted together with a gasket. You can take it apart later for maintenance. A butt weld fitting is welded permanently – no disassembly. We make both. Which one you need depends on whether you'll ever need to open the joint again.
Q: 3. Forged vs plate flange – which should I choose?
A: For 150LB and below, a plate flange can work. For 300LB and above, use a forged flange. Plate flanges are cut from steel plate and have a simpler grain structure. Forged flanges are denser and have no internal weak points. We don't substitute one for the other when the pressure rating calls for forged.
Q: 4. Can your ANSI flange connect to a DIN or JIS pipe?
A: Not directly – the bolt circle diameters and thickness are different. However, we produce DIN, JIS, GOST, BS, and EN1092 flanges in the same factory. If you need a DN100 flange in a different standard, just ask.
Q: 5. What is your typical lead time for, say, 200 pieces?
A: For carbon steel A105, approximately 15–20 days after drawing approval. We keep blanks in stock for common sizes. The fastest we've done was 7 days for a repeat customer in Thailand who had an urgent situation. But we don't promise that as a standard – quality work needs reasonable time.

A real example – Spain, a special finish, and 3 weeks
Last year a buyer from Spain sent a drawing with a face finish we didn't have in our standard list. His email was short: "Can you do this?"
We made a sample in 5 days and shipped it. He tested it and sent approval. The full order was finished in 3 weeks. His reply: "I didn't think anyone would say yes to this."
That's how we work. We say yes, then we figure it out.
Before you order – let's talk first
If you've read this far, you're probably serious about finding a flange that won't cause problems. Good. Here's what I suggest:
Don't place an order yet. Just reach out.
Tell me your pressure class, material, quantity, and destination port. I'll have someone in our shop take a short video of the product we're running that day. You'll see the machine, the cut, the finish – real life, not a drawing.
Then decide.
Contact:Sandy
Email: sandy@yongxingflange.com
WhatsApp/WeChat: 0086 15127785550
Factory address:
DingZhuangZi Industrial Zone, Mengcun County, Cangzhou City, Hebei Province, China

We've been making this product for decades. It's not new or flashy. But every one that leaves our shop cuts smooth on the lathe, fits where it should, and doesn't turn into someone's headache. If that's what you're looking for, get in touch.

Hot Tags: ansi steel forged dn100 flange, China ansi steel forged dn100 flange manufacturers, suppliers, factory, wholesale steel flange, cast steel flange, ansi steel flange, slip on flange, thick wall steel flange, sealing steel flange
Send Inquiry









