B-CT. 12X18h10t-IV GOST 33259-2015 Stainless Steel Forged Flange

B-CT. 12X18h10t-IV GOST 33259-2015 Stainless Steel Forged Flange

We export all over the world, we have 20 years experience in this pipeline area. We have stock for the common size and standard. Fast delivery Time. Completed Quality test equipment.

We uphold the spirit of 'integrity, responsibility, detail, and innovation', follow the latest development trend of ANSI Class150 Slip On Steel Flange, Casting Stainless Steel Flanges, Seamless Steel Tee, and continuously improve the company's service level and product quality with outstanding talents, advanced technology and scientific management. We encourage you to make get hold of as we've been wanting for companions inside our venture. Our company pays attention to innovation, focuses on selling high-quality and safe products, steadily improves production capacity and provides high-quality product services for the groups in need.

Product Specifications 

 

Product Name

GOST collar Flange(Big size pn10 pn 16 gost 12821 welding neck RF flange)

Items

Plate, Welding Neck, Slip on, Blind, Socket Welding, Lap joint, Threaded Flange etc.

Standard

ANSI

ANSI B16.5, ASME B16.47 series A/B

DIN

Germany 6bar, 10bar, 16bar, 25bar, 40bar

GOST

GOST 12820/12821/12836

EN1092-1

EN1092-01/05/11/12/13

JIS

JIS B 2220-1984, KS B1503, JIS B 2216

BS4504

BS4504 BS10 Table D/E

Material

ANSI

CS A105, S235, Steel 20; SS 304/304L, 316/316L

DIN

CS RST37.2, S235JRG, P245GH, P250GH; SS 304/304L, 316/316L

GOST

CS Steel 20, 16MN, Q235

EN1092-1

CS RST37.2, S235JRG, C22.8

JIS

SS400, SS 304/304L, 316/316L

BS4504

CS RST37.2, S235JRG, C22.8; SS 304/304L, 316/316L

Pressure

ANSI

Class 150, 300, 600, 900, 1500, 2500lbs

DIN

PN6, PN10, PN16, PN25, PN40

GOST

PN6, PN10, PN16, PN25, PN40, PN63, PN100

EN1092-1

PN6, PN10, PN16, PN25, PN40, PN63, PN100

JIS

5K, 10K, 16K, 20K, 30K, 40K

BS4504

PN6, PN10, PN16, PN25, PN40

Size

ANSI

1/2" - 80"

DIN

DN15-DN2000

GOST

DN15-DN1600

EN1092-1

DN15-DN2000

JIS

15A-1500A

BS4504

DN15-DN2000

What Is a GOST Collar Flange?

 

A GOST Collar Flange is a flange built to Russian technical standards. These standards – known as GOST – control quality and safety across industries like oil and gas, chemical processing, power generation, and shipbuilding.

What makes it different? The collar. A raised neck is machined onto the flange face. This collar is designed to slide inside the pipe. When two flanges are bolted together, the collars help center the pipes. Load is distributed more evenly across the joint.

Why does this matter? On high-temperature or high-pressure lines, plain flat face flanges can warp over time. Bolt stress becomes uneven. Leaks happen. The collar design reduces this risk by transferring some of the load away from the bolts and into the pipe wall.

product-730-546
One Feature Worth Expanding – The Collar's Machining Tolerance
 

Here's where a lot of cheap flanges fall apart: the collar diameter is cut wrong.

If the collar is too loose – say 1mm under the pipe's inner diameter – it won't center anything. The pipe sinks to the bottom of the joint. Bolts get tightened unevenly. Within a few heating cycles, the gasket fails on the loose side.

If the collar is too tight – meaning it's larger than the pipe's ID – it won't slide in at all. Your guys on site end up grinding the collar down. That takes time. And once the protective coating is ground off, rust isn't far behind.

The tolerance we hold is +0 / -0.5mm on the collar OD. Not "about right." Not "close enough." Every collar flange is measured before it leaves the machining station. Too loose? Rejected. Too tight? Rejected. Only the ones that slide in smoothly and center properly are packed and shipped.

This level of precision is achieved through CNC-controlled lathes operated by machinists who have been making these flanges for years. Not by guesswork. Not by eyeballing it.

Material Options – Chosen Based on What's Being Carried

 

Selection of the right material is done according to the application.

 

Material

Best suited for

16MN, 20# (carbon steel)

Water lines, low-pressure steam, oil transfer – standard Russian spec jobs

321 stainless steel

Higher temperatures (up to 800°C), mildly corrosive media, or jobs where titanium stabilization prevents weld decay

Alloy steel

High-pressure gas, sour service (H₂S), extreme temperature swings

 

Common sizes in carbon steel are kept in stock. Stainless and alloy are usually made to order, with lead times confirmed before production begins.

 
Surface Treatment – Determined by Environment
 

 

Surface coating is applied based on where the flange will be installed and how long it needs to last.

Shot blasting

Mill scale is removed. A uniform surface is left behind, ready for paint or for immediate use indoors.

Zinc plating

A thin protective layer is added. Suitable for indoor use or dry climates.

Hot-dipped galvanized

A thick zinc coating is bonded to the steel. Recommended for outdoor installations, coastal areas, or any humid environment.

Anti-rust oil

A temporary coating is applied. Suitable for short-term storage or sea freight when long-term corrosion protection is not required.

 

Instructions for surface treatment should be provided at the time of order. If no instruction is given, anti-rust oil will be applied by default.

How a GOST Collar Flange Is Made – Step by Step

All production is done in-house at our Mengcun factory. No outsourcing. No middlemen.

The process: 

1

Raw material receiving

Material is purchased with mill certificates. Chemistry is verified before cutting.

2

Cutting

Blanks are cut to rough weight using seven large bandsaws.

3

Heating

Even heating is applied before forging. Cold spots are avoided.

4

Forging

A 3500T hydraulic press and a 2500D CNC ring rolling machine are used. Special attention is paid to collar thickness during this stage.

5

Heat treatment

Normalizing or annealing is performed depending on the material. Internal stress is relieved.

6

Machining

Lathes and drillers are used for facing, boring, and bolt hole drilling. The collar OD is machined to the tolerance described above.

7

Inspection

Dimension checks, hardness tests, and (on request) pressure tests are performed.

8

Surface treatment

Shot blasting is applied, followed by the coating specified by the customer.

 

Packing – Flanges are packed in wooden boxes or on wooden pallets. Fumigated or non-fumigated options are available.

Annual capacity: 13,000 tons of flanges and forged fittings. Maximum machinable diameter: 2800mm.

Where These Flanges Are Already Being Used

 

 

Oil gathering lines – Siberia

A network of small-diameter oil lines was being installed in an area where winter temperatures drop to -40°C. GOST certification was required for regulatory approval. 20# carbon steel flanges with full material traceability were supplied. The inspector's sign-off was received on the first batch. No rejections were issued.

 

Chemical plant – Kazakhstan

A solvent transfer line was being retrofitted. The original flanges had failed at the neck due to thermal cycling cracks. 321 stainless steel collar flanges were supplied as replacements. The titanium stabilization in the material handles heating and cooling without cracking. After two years of operation, no failures have been reported.

 

Shipbuilding – South Korea

A vessel's pipe system required GOST-compliant flanges for a section being retrofitted with Russian-origin components. DN400 collar flanges in alloy steel were supplied. Bolt hole alignment was verified before shipping.

 
Company Background – Who Is Making Your Flanges

CANGZHOU HANGXIN FLANGE CO., LIMITED – Flange Manufacturer Since 1993

 

Founded in 1993, we have focused solely on flanges and pipe fittings for over 30 years. Our factory is located in Mengcun County, Hebei Province - China's hometown of elbows and pipe fittings. Facility size: 18,000㎡ with fixed assets of ~50M RMB.

 

Certifications: ISO9001, 3A, CE.

Export markets: Russia, South Korea, France, Dubai, Middle East, Southeast Asia, Spain, Israel, Thailand, South America - including 30+ years of GOST collar flange supply to Russia.

product-800-600

 

In-house equipment:
3500T hydraulic press, 2500D CNC ring rolling machine, 7 forging hammers, 7 large bandsaws, lathes & drillers (up to 2800mm), shot blasting, heat treatment furnace.

 

Why choose us?
Real pricing + confirmed delivery dates. No auto-generated quotes. In-house manufacturing, strict QC, and optional third-party inspection.

Compliance note:
All claims are based on verified factory capabilities. No absolute terms (e.g., "best," "first") are used. Performance may vary by application. Contact us for test reports or samples.

Services That Can Be Requested

 

Customization – Non-standard sizes, special materials, or odd bolt hole patterns can be produced. A drawing should be submitted for review.

OEM – Your brand can be applied to packaging or to the flange itself.

Technical support – Material or pressure rating questions can be directed to our team before an order is placed.

Fast dispatch – Common sizes in stock can be shipped within days of payment confirmation.

Payment terms accepted: 30% deposit, 70% against copy of B/L. L/C at sight or 30-day T/T are also accepted.

Shipping: 120km from Xingang Port. Delivery to Russia can be done by sea or by train. One container typically takes 20 days to produce, depending on the quantity ordered.

Frequently Asked Questions (FAQ)
 
 

What pressure ratings are available for the GOST Collar Flange?

+

-

PN6, PN10, PN16, PN25, and PN40 can be supplied. For carbon steel (16MN, 20#), PN40 is the highest rating recommended for normal temperature operation. Higher pressures should be handled with alloy steel. Operating conditions should be shared with us so the correct rating can be confirmed.

Can non-standard bolt hole patterns be drilled?

+

-

Yes. A drawing with the required bolt circle diameter, hole count, and hole size should be sent for review. A minimum order quantity of 50 pieces is typically required for non-standard patterns. Our engineering team will check whether the pattern fits within the flange face before production begins.

What surface treatment is applied for outdoor use in humid climates?

+

-

Hot-dipped galvanizing is recommended for outdoor or coastal installations. An anti-rust oil coating is not sufficient for long-term outdoor exposure. Zinc plating offers moderate protection but is best suited for indoor or dry environments. Your application environment should be specified at the time of order.

Are common sizes kept in stock for urgent projects?

+

-

Yes. DN100 to DN500 in 16MN and 20# are typically kept on the shelf. Stainless steel and alloy steel flanges are usually made to order. Current stock levels can be checked by contacting Lily directly before an order is placed.

In an effort to finest meet up with client's requirements, all of our operations are strictly performed in line with our motto 'High High quality, Competitive Rate, Fast Service' for B-CT. 12X18h10t-IV GOST 33259-2015 Stainless Steel Forged Flange. We establish long-term supporting relationships with preferential prices and excellent after-sales service. If you give us a list of products you are interested in, along with makes and models, we can send you quotations.

Hot Tags: gost collar flange, China gost collar flange manufacturers, suppliers, factory, DIN 2573 Steel Flange, flange efficiency, steel threaded flange for outdoor recreation applications, din steel flange production time, flat face flange, gost flange for chemical industry

[[ProKeywords]]

Send Inquiry