
JIS Standard 16K Carbon Steel Flange
This forged carbon steel flange, manufactured to JIS B2220 with a 16K pressure rating (16 kgf/cm² ≈ 1.6 MPa), is designed for moderate to high-pressure piping systems in petrochemical, power generation, shipbuilding, and general industrial applications where JIS-spec dimensional precision is required.
The thing about a JIS Standard 16K Carbon Steel Flange is that it offers a well-established pressure rating of 16 kgf/cm² (approx. 1.6 MPa at ambient). This is comparable to ANSI Class 150 on paper, though the dimensional standards are entirely different-so you cannot swap them. In practical applications, the performance of this carbon steel variant often depends on how it handles thermal cycling, how its hub geometry distributes load, and how the raised-face sealing surface holds up after multiple maintenance cycles-especially considering carbon steel's tendency to gall under repeated heat. We have test data to support these observations.
Dimensional & Rating Summary
|
Parameter |
Value |
Notes |
|
Standard |
JIS B2220:2004 / B2220:2012 |
The 2012 revision clarified some dimensional tolerances; we manufacture to both depending on customer spec. |
|
Pressure class |
16K (16 kgf/cm²) |
Approximately 1.57 MPa at 20°C. Derates with temperature-see note below. |
|
Size range |
10A through 1500A |
10A is small-bore instrument connections; 1500A is main header territory. |
|
Common materials |
ASTM A105, SS400, S20C/S25C, 20# |
A105 is the most common for export; SS400 and 20# are more typical for domestic Asian projects. |
|
Flange types |
WN, SO, BL, SW, TR, LJ |
WN and SO cover about 80% of what we ship. |
|
Facing types |
RF (most common), FF, RTJ, T&G, MF |
RF is standard unless the fluid is highly corrosive or the gasket type demands something else. |
|
Process |
Forged, normalized, machined |
Normalizing after forging relieves internal stress and refines grain size. |
|
Coating options |
Oil, paint, galvanized |
Galvanizing adds lead time; oil is for short-term storage only. |
Temperature derating note: Like any carbon steel flange, the 16K rating drops as temperature goes up. At 400°C, you're looking at roughly 60-65% of the ambient rating. If your system runs hot, we need to talk about the actual operating temperature before finalizing the spec. The standard doesn't do the math for you.

A Few Things Worth Understanding
We forge these flanges. That means the steel billet is heated and compressed under a hydraulic press or hammer, which aligns the grain structure along the contour of the part. Casting, by contrast, pours molten steel into a mold and lets it cool. The forged part has better impact resistance, higher fatigue strength, and fewer internal voids. In a high-cycle pressure system, that translates to longer service life and fewer unexpected failures. It's not marketing-it's metallurgy.
Take a welding neck flange. The tapered hub isn't just for show-it reduces stress concentration at the weld joint by gradually transitioning the thickness from the pipe wall to the flange ring. A long welding neck does this more gradually than a short one. For high-pressure steam or cyclic service, the long pattern is worth the extra cost. For general water or low-pressure gas, the short pattern is fine. We see a lot of buyers default to short WN because it's cheaper, without checking whether their service actually justifies it.
Raised face is the default because it works with most gasket types-spiral wound, PTFE envelope, compressed fiber. Flat face is used primarily with flat gaskets in low-pressure systems where bolt load is limited. Ring-type joint is for high-pressure gas where you need metal-to-metal sealing. The flange itself doesn't care-but the gasket does. If you're specifying RF on a system that should use RTJ, you're creating a leak path before the system even starts up.
We offer anti-rust oil, paint, and galvanizing. Oil is for shipping protection only-it's not field-durable. Paint adds a barrier layer but chips. Galvanizing provides cathodic protection but adds lead time and cost. The real question is: if the environment is that corrosive, should you be using carbon steel at all? Sometimes the right answer is upgrading to stainless, not coating carbon steel. We'll tell you when we think that's the case.
Typical Applications – What We Actually See
The 16K rating shows up in a few distinct use cases:
Refinery process lines
moderate temperature, moderate pressure, often with some corrosion risk. The carbon steel version is common for non-corrosive fractions; coated versions for sour service.
01
Chemical plants
usually spec'd by Japanese engineering firms who design to JIS across the board. We see these in plants in Southeast Asia and the Middle East that were built in the 1990s-2000s.
02
Shipbuilding
JIS is common in Asian shipyards. 16K flanges show up in cooling water, fuel oil, and ballast systems.
03
Power plants
steam extraction lines, cooling water loops, auxiliary systems.Not the main steam line-that usually calls for higher ratings or alloy steel.
04
Building services
HVAC, fire protection, water supply in projects that adopted Japanese standards early on.
05
The common thread is that these are systems where the pressure isn't extreme but the standard is already established. You don't spec 16K because it's the best option in absolute terms-you spec it because the rest of the system is JIS and you need everything to bolt up correctly.

Who's Behind These Flanges?
We've been making flanges since 1993. That's not a flex-it just means we've probably already made whatever you're about to ask for, and we know where the common issues show up.
Our facility is in Mengcun County, which is known locally as the pipe fitting hub. It's practical for logistics-about 120 km to Xingang Port, 260 km to Beijing airport. Sea freight is our default; air freight works for small lots if you're in a rush.
Shop floor is about 18,000 square meters, with somewhere around 50 million yuan in equipment.
We run a 3500T press, a 2500D CNC ring roller, seven hammers, seven band saws, and the usual complement of lathes and drillers.That setup gets us up to 2800 mm diameter and roughly 13,000 tons per year.
Certifications: ISO9001, CE, and 3A. We build to ANSI, DIN, JIS, BS, GOST, EN1092, AWWA, and SABS-basically whatever standard your project calls for. And we do custom dimensions off drawings; that's not unusual for us.
Export markets: Russia, South Korea, France, UAE, Saudi Arabia, Southeast Asia, Spain, Israel, Thailand, and various South American countries. Many of these are repeat buyers-they come back because we're predictable on quality and delivery.
Where Our Products Have Landed
We ship all over-Russia, South Korea, France, Dubai, the Middle East, Southeast Asia, Spain, Israel, Thailand, South America. And here's the thing-most of these aren't first-timers. They keep coming back. Why? Because we deliver quality on time, every single time. No excuses.
How We Actually Operate
A few things that are true about how we work:
Quality verification is built into the process
We inspect at material receiving, after forging, after machining, and before coating. That's four checkpoints. It's not about catching defects at the end-it's about not letting them get that far.
Pricing is competitive because we've been doing this long enough to know where the waste is
We run batch sizes that make sense, we keep standard sizes in stock, and we plan production around real orders rather than speculative inventory.
Delivery dates are commitments
If we say 25 days, we ship in 25 days. Sometimes earlier. Rarely later-and if it's going to be later, we tell you before you ask.
We know the tolerance pitfalls
We've made this flange in sizes from 10A up to 1500A. We know which dimensions tend to cause fit issues on site-and we catch them before shipping.
Questions That Come Up
Q: What's the actual difference between this and ANSI Class 150?
Dimensions are different-bolt circle, bolt holes, thickness, hub profile. You can't bolt them together. The pressure rating is close but not identical; 16K is slightly higher at ambient, but the derating curves are different. Treat them as non-interchangeable.
Q: Can I get these in stainless?
Yes, but then it's not the same product. Stainless versions are available in 304, 316, and similar grades. Lead time and pricing differ. We treat it as a separate item.
Q: What's the minimum order for custom drilling?
Typically 10–20 pieces, depending on size. For large diameters (above 600A), we can be flexible on quantity because the setup cost is similar whether you're making 5 or 20.
Q: Do you provide material test reports?
Yes, EN 10204 3.1 is standard. We can also arrange third-party inspection-SGS, BV, or whoever you specify-at your cost.
Q: How do I store these to avoid rust before installation?
Indoors, off the ground, under cover. The oil coating is for shipping, not long-term storage. If they're sitting for more than a month, re-oil and cover. In coastal areas, take extra precautions-salt air accelerates surface rust.
Q:Payment terms?
Standard is 30% deposit, 70% before shipment for first orders. L/C at sight is possible for larger orders or established relationships. We're flexible on currency-USD, EUR, RMB.
If you know what size, type, and quantity you're working with-or if you've got a drawing for something non-standard-send it over. Even if it's a JIS Standard 16K Carbon Steel Flange with special facing or bore requirements, we'll give you a straight answer on pricing, lead time, and any technical issues we see in your spec.
Contact: Sandy
Address
DingZhuangZi Industrial Zone, Mengcun County, Cangzhou City, Hebei Province, China
Phone Number
8618931763322
sandy@yongxingflange.com

We've been doing this since 1993. We've seen most of what works and what doesn't. Let's get your spec right the first time.
Hot Tags: jis standard 16k carbon steel flange, China jis standard 16k carbon steel flange manufacturers, suppliers, factory, jis b2220 steel flange for instrumentation, steel flange according to jis b2220, healthcare facility jis b2220 steel flange, jis b2220 steel flange with high strength, wire jis b2220 steel flange, generator jis b2220 steel flange
Send Inquiry








