
ANSI Class300 DN50 Weld Neck Steel Flange
HANGXIN Brand Carbon Steel Flange with competitive price and high quality, Flanges fittings inquiry: sandy@yongxingflange.com WhatsApp/Wechat:+86 15127785550
A flange is only as good as the job it handles. The ANSI Class300 DN50 Weld Neck Steel Flange is not a one-size-fits-all component. It is designed for specific applications where pressure, temperature, and pipe movement would quickly destroy a cheaper alternative.
Below we walk through three real-world scenarios where this flange proves its value - and why your next project may need it.

Application
High-Pressure Steam Distribution
The challenge: Steam at 180°C and 1.6 MPa creates constant expansion and contraction. Slip-on flanges eventually develop leaks at the weld root.
Why this flange works: The weld neck design transfers stress away from the weld and into the flange hub. The ANSI Class300 DN50 Weld Neck Steel Flange maintains seal integrity through hundreds of thermal cycles. The smooth bore also reduces turbulence, preventing erosion around the weld.
Result: Longer gasket life, fewer shutdowns.
Pump and Compressor Connections
The challenge: Pump discharge lines experience vibration and bending moments. A weak flange connection cracks over time.
Why this flange works: The tapered hub provides rigidity at the bolted connection while remaining flexible where it meets the pipe. This absorbs vibration without transferring full force to the weld. Engineers choose the ANSI Class300 DN50 Weld Neck Steel Flange for rotating equipment connections precisely for this reason.
Result: Lower risk of fatigue failure near the pump nozzle.
Flammable or Toxic Fluid Lines
The challenge: Any leak in a chemical or fuel line is a safety incident. Gasket creep and bolt relaxation cannot be tolerated.
Why this flange works: The raised face (RF) finish combined with Class300 bolting provides consistent gasket compression. Even if bolts relax slightly, the rigid neck maintains alignment. Many safety-conscious facilities now specify the ANSI Class300 DN50 Weld Neck Steel Flange as their minimum standard for dangerous fluids.
Result: Tighter containment, easier regulatory compliance.
Technical Specifications (ASME B16.5)
Below is the dimension table for ANSI Class300 DN50 Weld Neck Steel Flange – keep this for engineering and procurement reference.
|
SIZE |
STANDARD |
SERIES |
PRESSURE |
|
|
1 |
1/2''-64'' |
ASTM ANSI B16.5, ASA, API-605,etc.. |
slip-on, welding neck, blind, threaded, lap-joint, etc. |
Class150,300,600,900,1500 |
|
2 |
1/2''-64'' |
EN 1092,etc… |
plate, slip-on, blind etc. |
PN10 PN16 PN25 |
|
3 |
1/2''-64'' |
DIN2573, 2572, 2631, 2576, 2632, 2633, 2543, 2544, etc |
plate, slip-on, welding neck, blind, threaded etc. |
PN10 PN16 PN25 |
|
4 |
1/2''-64'' |
BS4504, PN16, PN25, PN40, etc. |
plate, slip-on, welding neck, blind, threaded etc. |
PN10 PN16 PN25 |
|
5 |
1/2''-64'' |
JIS 5K, 10K, 16K, 20K etc. |
plate, slip-on, blind etc. |
5K 10K 16K 20K |
*Notes: Class300, Raised Face (RF), ASTM A105. Bore size varies by pipe schedule (Sch40 / Sch80 standard).*

Why Hangxin for This Flange?
Material traceability
Each flange stamped with heat number; Mill Test Report included.
Inventory
Ready stock of Sch40 and Sch80 bore in carbon steel (ASTM A105).
Custom options
Stainless steel (F304/F316), NACE MR0175 for sour service, or special coatings.
Quality check
Dimensional inspection on CMM; PMI testing available upon request
Order & Inquiry

Lead time: 5–10 days for standard finish
Sample: One piece available at material cost + shipping
Packaging: Plywood crates with edge protection, export-ready
Flange-specific inquiry:
E-mail:sandy@yongxingflange.com
Tel/WhatsApp: +86 15127785550
Skype:sandy198607
QQ:767076081
Frequently Asked Questions
Can I use this ANSI Class300 DN50 Weld Neck Steel Flange with a Class150 flange?
No. Class300 and Class150 have different bolt circles and thicknesses. They are not interchangeable. Always match pressure classes on both sides of a connection.
What pipe schedules does this flange fit?
The bore is machined to match standard Sch40 or Sch80 pipe OD. We can also custom-bore to Sch160 or XXS upon request - just specify your pipe OD and wall thickness.
Do you provide the flange with a hub that matches the exact pipe wall thickness?
Yes. When you order, please state your pipe schedule. We machine the hub bore to fit your pipe ID and OD, reducing the need for internal weld buildup. This is standard at no extra charge for volume orders.
Three applications. One flange. If your project involves high pressure, vibration, or hazardous fluids, this is the connection you can rely on.
Hot Tags: ansi class300 dn50 weld neck steel flange, China ansi class300 dn50 weld neck steel flange manufacturers, suppliers, factory, flange environmental protection, flange bundle, flange for pharmaceutical industry, flange for renewable energy, flange manufacturer, flange for textile industry
Send Inquiry










