What is the standard size of an EN flange?
Jan 19, 2026
Hey there! As a supplier of EN flanges, I often get asked about the standard size of an EN flange. It's a pretty common question, and understandably so. After all, getting the right size is crucial for any project involving these flanges. So, let's dive right in and break it all down.
What Are EN Flanges Anyway?
First off, EN flanges are flanges that comply with the European Norm (EN) standards. These standards are designed to ensure that flanges meet certain quality and performance criteria across Europe. They're used in a whole bunch of industries, like plumbing, oil and gas, and manufacturing. You name it, they're probably in there somewhere.
Understanding the Standard Sizes
The standard size of an EN flange isn't just a single measurement. It's actually a combination of several dimensions that all work together to make the flange fit properly and function as it should. Here are the main things you need to know about:
Nominal Diameter (DN)
The nominal diameter is basically a reference number that gives an idea of the size of the flange. It's not the actual inside or outside diameter but more of a standardized sizing system. For example, a flange with a DN 50 is designed to be used with a pipe that has a similar nominal size. The DN values typically range from DN 10 all the way up to DN 2000 or even higher in some cases.
Pressure Rating (PN)
The pressure rating, or PN, indicates the maximum pressure that the flange can safely handle. Common pressure ratings for EN flanges include PN 10, PN 16, and PN 25. Each of these ratings corresponds to a specific set of dimensions and technical requirements. A flange with a higher PN rating will generally be thicker and have more robust construction to withstand greater pressure.
Let's take a closer look at some of these common pressure ratings and their associated flanges:
- EN1092 - 1 PN16 Carbon Steel Flange: This type of flange is rated to handle pressures of up to 16 bar. It's made from carbon steel, which is strong and durable, making it suitable for a wide range of applications.
- EN 1092 - 1 PN10 Steel Flange: With a pressure rating of 10 bar, this flange is a bit less heavy - duty compared to the PN16. It's often used in systems where the pressure requirements aren't as high.
- EN1092 - 1 PN25 Forged Carbon Steel Flange: This one can handle pressures of up to 25 bar. The forged construction gives it even more strength, making it ideal for high - pressure applications.
Other Dimensions
Apart from DN and PN, there are other important dimensions to consider. The outside diameter (OD) of the flange, the bolt circle diameter (BCD), the number and size of bolt holes, and the thickness of the flange all play a part in determining how the flange will fit and function.
The OD is the overall diameter of the flange, from one side to the other. The BCD is the diameter of the circle on which the bolt holes are located. The number and size of the bolt holes are important because they determine how the flange will be bolted to other components. And the flange thickness affects its strength and ability to withstand pressure.
Why Standard Sizes Matter
You might be wondering why it's so important to stick to the standard sizes. Well, there are a few good reasons.
Firstly, standard sizes ensure compatibility. When you use a standard - sized EN flange, you know for sure that it will fit properly with other components that are also designed to the same standards. This means you won't have to worry about issues like leaks or misalignments.
Secondly, standard sizes are more readily available. Since they're widely used, manufacturers produce them in large quantities, which makes them easier to source and usually more cost - effective.
Finally, using standard sizes simplifies the design and planning process. You don't have to spend a lot of time figuring out custom dimensions or making special adaptations. You can just refer to the standard specifications and get on with your project.
How to Choose the Right Size
So, how do you go about choosing the right standard size for your EN flange? Here are some steps to follow:
- Determine the Pipe Size: The first thing you need to do is figure out the nominal size of the pipe that the flange will be connected to. This will give you a starting point for selecting the appropriate DN.
- Assess the Pressure Requirements: Consider the maximum pressure that the system will be under. This will help you decide on the right PN rating for your flange.
- Check the Application: Think about the specific application of the flange. For example, if it's going to be used in a high - temperature environment, you might need to choose a flange with special materials or coatings.
- Refer to the Standards: Look up the EN standards to find the exact dimensions and specifications for the flange based on the DN and PN you've chosen.
Quality Assurance
As a responsible EN flange supplier, I always make sure that the flanges we offer meet the highest quality standards. We use only top - grade materials and state - of - the - art manufacturing processes to ensure that our flanges are strong, reliable, and durable.
Before we ship any flanges to our customers, we perform rigorous quality checks. This includes inspecting the dimensions to make sure they match the standard specifications and testing the flanges to ensure they can withstand the specified pressure ratings.
Contact Us for Your Flange Needs
If you're looking for high - quality EN flanges, you've come to the right place. Whether you need a small quantity for a DIY project or a large order for a commercial application, we've got you covered. We offer a wide range of sizes and pressure ratings to meet your specific requirements.


Don't hesitate to reach out if you have any questions or need help choosing the right flange for your project. We're here to make the process as easy and hassle - free as possible. So, drop us a line and let's get started on finding the perfect EN flanges for you.
References
- European Committee for Standardization (CEN). (Year of Publication). EN 1092 - 1: Specification for Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, Class - Designated Flanges.
