What are the dimensions of a PN16 EN flange?

Jul 09, 2025

Hey there! As an EN flange supplier, I often get asked about the dimensions of a PN16 EN flange. So, I thought I'd write this blog post to break it all down for you in a simple and easy-to-understand way.

First off, let's talk about what "PN16" and "EN" actually mean. "PN" stands for "Pressure Nominal," and it's a way to indicate the pressure rating of the flange. In the case of PN16, it means the flange is designed to handle a nominal pressure of 16 bar. "EN" refers to the European Norm, which is a set of standards that define the specifications for various products, including flanges. So, a PN16 EN flange is a flange that meets the European standards and has a pressure rating of 16 bar.

Now, let's get into the dimensions. The dimensions of a PN16 EN flange can vary depending on the nominal diameter (DN) of the flange. The nominal diameter is a standard size designation that represents the approximate inside diameter of the pipe that the flange is intended to be connected to.

Common Dimensions for Different Nominal Diameters

DN50

For a DN50 EN1092 Standard Steel Flange, the key dimensions usually include:

  • The outside diameter (OD) is typically around 165 mm. This is the overall diameter of the flange, which gives you an idea of how much space it will take up when installed.
  • The bolt circle diameter (BCD), which is the diameter of the circle on which the bolt holes are located, is usually about 125 mm. This is important because it determines the size of the bolts and the spacing between them.
  • The number of bolt holes is commonly 4, and the diameter of each bolt hole is around 18 mm. These bolt holes are used to connect the flange to another flange or a pipe.
  • The thickness of the flange can vary, but it's often around 18 mm. This thickness is crucial as it affects the strength and durability of the flange.

DN100

When we move up to a DN100 flange:

  • The outside diameter goes up to approximately 215 mm. As the nominal diameter increases, so does the overall size of the flange.
  • The bolt circle diameter is about 180 mm, and there are usually 8 bolt holes. Each bolt hole has a diameter of around 18 mm.
  • The thickness of the flange might be around 20 mm. This extra thickness is needed to handle the increased pressure and load associated with the larger diameter.

DN150

For a DN150 EN1092 Standard Steel Flange:

  • The outside diameter is roughly 280 mm. You can see that as the DN increases, the OD grows significantly.
  • The bolt circle diameter is about 240 mm, and there are also 8 bolt holes with a diameter of around 22 mm.
  • The flange thickness is typically around 22 mm.

Standardization and Variations

It's important to note that these dimensions are based on the EN standards, but there can still be some minor variations depending on the manufacturer. Some manufacturers might have their own slight deviations from the standard dimensions, but these should still be within an acceptable tolerance range.

When you're looking for a PN16 EN flange, it's always a good idea to ask the supplier for the exact dimensions and specifications. This way, you can make sure that the flange will fit your specific application and requirements.

Why the Dimensions Matter

The dimensions of a PN16 EN flange are crucial for several reasons. Firstly, proper sizing ensures a good fit between the flange and the pipe or another flange. If the dimensions are off, it can lead to leaks, which can be a major problem, especially in applications where the fluid or gas being transported is hazardous or expensive.

Secondly, the dimensions affect the strength and performance of the flange. The thickness, for example, determines how much pressure the flange can withstand. If the flange is too thin, it might fail under high pressure, leading to safety issues.

Our Offerings as an EN Flange Supplier

As an EN flange supplier, we offer a wide range of PN16 EN flanges in different nominal diameters. Our flanges are made from high-quality materials, such as carbon steel and stainless steel, to ensure durability and reliability.

We understand that every customer has unique needs, so we can also provide custom-made flanges if the standard sizes don't meet your requirements. Whether you need a special diameter, a different bolt pattern, or a specific material, we can work with you to create the perfect flange for your project.

EN1092 Standard Steel Plate Flange

One of our popular products is the EN1092 Standard Steel Plate Flange. These flanges are known for their strength and versatility. They can be used in a variety of applications, including oil and gas, chemical processing, and water treatment.

Our steel plate flanges are manufactured using advanced techniques to ensure consistent quality and precise dimensions. We also conduct strict quality control checks at every stage of the manufacturing process to make sure that our flanges meet or exceed the EN standards.

Contact Us for Your Flange Needs

If you're in the market for a PN16 EN flange or any other type of EN flange, don't hesitate to get in touch with us. We have a team of experts who can help you choose the right flange for your application and answer any questions you might have.

DN150 EN1092 Standard Steel FlangeDN50 EN1092 Standard Steel Flange

Whether you're a small business or a large industrial company, we're committed to providing you with the best products and services at competitive prices. So, if you want to discuss your flange requirements or get a quote, just reach out to us. We're here to make your flange buying experience as smooth and hassle-free as possible.

References

  • European Committee for Standardization (CEN). EN 1092 series of standards for flanges.
  • Various industry manuals and guides on flange specifications and applications.