What are the different types of steel plate flanges?

Jan 01, 2026

Steel plate flanges are essential components in various industrial applications, providing a secure and leak - proof connection between pipes, valves, and other equipment. As a steel plate flange supplier, I have in - depth knowledge of the different types of steel plate flanges available in the market. In this blog, I will introduce you to these various types, their features, and typical applications.

Weld Neck Flanges

Weld neck flanges are one of the most commonly used types of steel plate flanges. They are characterized by a long, tapered neck that is welded to the pipe. This design provides excellent structural integrity and is suitable for high - pressure and high - temperature applications. The tapered neck helps to reduce stress concentration at the weld joint, which enhances the overall strength of the connection.

Weld neck flanges are typically used in industries such as oil and gas, chemical processing, and power generation. For example, in an oil refinery, weld neck flanges are used to connect pipes that carry crude oil, refined products, and various chemicals under high pressure. Their smooth bore and continuous flow path also make them suitable for applications where fluid flow must be maintained without significant turbulence.

Slip - On Flanges

Slip - on flanges are another popular type of steel plate flange. They are designed to slide over the end of a pipe and are then welded in place. Slip - on flanges are relatively easy to install, which makes them a cost - effective option for many applications. They have a lower hub height compared to weld neck flanges, and the welding is done on both the inside and outside of the flange.

There are different standards and specifications for slip - on flanges. For instance, the ANSI Carbon Steel Slip On Flange follows the American National Standards Institute (ANSI) standards. These flanges are widely used in general industrial piping systems, water treatment plants, and HVAC systems. The ANSI standard ensures compatibility and interchangeability, which simplifies the procurement and installation process.

The ANSI Class300 Slip On Forged Flange is a specific type within the slip - on flange category. The "Class300" indicates the pressure - rating of the flange, which means it can withstand a certain level of pressure. These flanges are often used in medium - pressure applications where the cost - effectiveness of slip - on flanges is desired, along with the necessary pressure - bearing capacity.

Socket - Weld Flanges

Socket - weld flanges are similar to slip - on flanges in that they are also slipped over the end of a pipe. However, instead of a full - circumferential weld on the outside, socket - weld flanges have a socket into which the pipe is inserted, and a fillet weld is made at the top of the socket. This type of flange is suitable for small - diameter pipes and low - to medium - pressure applications.

Socket - weld flanges are commonly used in instrument lines, small - bore piping systems, and in applications where space is limited. Their compact design and the reduced amount of welding required make them a practical choice in such scenarios. The smooth interior of the socket - weld connection also minimizes the risk of fluid accumulation and corrosion.

Blind Flanges

Blind flanges are used to close the end of a pipe, valve, or vessel. They do not have a bore in the center, which effectively blocks the flow of fluid. Blind flanges are typically made of steel plate and are available in various sizes and pressure ratings.

Blind flanges are used in many industrial settings. For example, during maintenance or inspection of a piping system, a blind flange can be installed to isolate a section of the pipe. They are also used in the construction of pressure vessels, where they provide a sealed end - cap. In some cases, blind flanges may be designed with bolt holes to allow for future connection or modification of the system.

Threaded Flanges

Threaded flanges have internal threads that allow them to be screwed onto the end of a threaded pipe. This type of flange is easy to install and does not require welding, which can be an advantage in some situations, such as in areas where welding is not permitted due to safety regulations.

Threaded flanges are commonly used in low - pressure and small - diameter piping systems, such as in plumbing and some light - industrial applications. However, they are not suitable for high - pressure or high - temperature applications because the threaded connection may not provide a reliable seal under extreme conditions.

Lap - Joint Flanges

Lap - joint flanges consist of two parts: a loose flange and a lap - joint stub end. The stub end is welded to the pipe, and the loose flange can be freely rotated around the stub end. This design allows for easy alignment of the bolt holes during installation.

Lap - joint flanges are often used in applications where frequent disassembly and reassembly are required, such as in temporary piping systems or in systems where the flange needs to be easily repositioned. They are also suitable for applications where the flange may need to be replaced without cutting the pipe.

Orifice Flanges

Orifice flanges are specifically designed for use with orifice plates, which are used to measure the flow rate of fluids in a piping system. Orifice flanges have special features, such as pressure - tapping holes, which are used to connect pressure - measuring instruments.

ANSI Class300 Slip On Forged Flange2 Inch Pipe Flange

These flanges are commonly used in industries where accurate flow measurement is critical, such as in the oil and gas industry, chemical plants, and water treatment facilities. The proper installation of orifice flanges is essential to ensure accurate flow measurement and reliable operation of the overall system.

Selection Considerations

When selecting the appropriate type of steel plate flange for a specific application, several factors need to be considered. First, the pressure and temperature requirements of the system are crucial. High - pressure and high - temperature applications typically require weld neck flanges or other high - strength flange types, while low - pressure applications may be suitable for slip - on or threaded flanges.

The size of the pipe is also an important factor. Small - diameter pipes may be better suited for socket - weld or threaded flanges, while large - diameter pipes often require weld neck or slip - on flanges. The type of fluid being transported, such as corrosive chemicals or abrasive materials, also affects the flange selection. In corrosive environments, flanges made of corrosion - resistant materials may be necessary.

In addition, the installation and maintenance requirements of the system should be taken into account. If frequent disassembly is needed, lap - joint flanges may be a good choice. If welding is not feasible, threaded flanges could be considered.

Conclusion

As a steel plate flange supplier, I understand the importance of providing the right type of flange for different industrial applications. Each type of steel plate flange has its own unique features, advantages, and limitations. Whether it is the high - strength weld neck flanges for high - pressure applications, the cost - effective slip - on flanges for general - purpose use, or the specialized orifice flanges for flow measurement, we have a wide range of options to meet your needs.

If you are in the market for steel plate flanges, such as the 2 Inch Pipe Flange or any other type, I encourage you to contact me for more information. I can help you select the most suitable flange based on your specific requirements and provide you with high - quality products at competitive prices. Let's start a discussion about your project and find the best flange solutions together.

References

  • "Piping Handbook" by George A. Antaki.
  • ANSI Standards for Steel Pipe Flanges and Flanged Fittings.
  • API Standards for Flanges and Flange Fittings in the Oil and Gas Industry.